In a classical inorganic solar cell, pairs of charge carrier – an electron and a hole – are generated by the absorbed sunlight. These two oppositely charged carriers are only weakly Coulomb bound, due to the screening being rather efficient in this material class. The potential drop at the interface between a p- and an n-doped semiconductor layer (the pn junction), leads to their separation and subsequent transport to the respective contacts: a current flows. In organic semiconductors, things are somewhat different.
Here, the screening of opposite charges is much weaker as the dielectric constant is lower. This leads to a much stronger interaction of the photogenerated positive and negative charges. Therefore, the primary optical excitation in organic materials is called (singlet) exciton, i.e., a strongly bound electron-hole pair. As this binding is more difficult to be overcome as compared to inorganic systems, the concept of organic solar cells has to be different… which we will come back to later.
Continue reading “How Do Organic Solar Cells Function? – Part Zero”
So why disordered materials? Arguing from an application based (=engineer) point of view, disordered materials are usually easier and cheaper to be manufactured than (single or poly) crystalline ones. Looking at organic semiconductors, such as conjugated polymers or fullerene derivatives (“bucky balls”): they are soluble and can thus be deposited from the liquid phase – e.g., by printing (offset, inkjet, you name it). The vision for the so called plastic electronics is to print circuits and devices on flexible substrates. This can be done at room temperature (low energy) and ideally with roll-to-roll processes (high throughput). Sounds good, eh?
Well, there are some drawbacks in terms of the application… though not for researchers;-) Printing semiconductors usually leads to rather disordered films, which have very low charge carrier mobilities as compared to Silicon and other inorganic semiconductors, and are thus not suitable for high-frequency applications. However, for photovoltaic devices, the low mobilities are not that much of a drawback. That said, organic solar cells are still at below 7% power conversion efficiencies… for very small areas. Single crystalline Silicon, on the other hand, sees already above 20% for modules.
Continue reading “Why Disordered Materials?”
Welcome! My name is Carsten Deibel, and this is my blog on mostly science-related issues concerning my field of interest, the physics of disordered materials. Not sure myself where this may lead, so let’s see. Looking forward to see you around;-)